DIY Wood Round Ring Holder from Erica ~ Diane's Vintage Zest!

Monday, June 23, 2014

DIY Wood Round Ring Holder from Erica

Today's amazing post comes from Erica of Dwell Beautiful!  Remember the fallen wood that I wasn't sure what to do with?  Well, I have (at least) one slice set specifically aside for this project!  It looks so good, but Erica explains step-by-step how to make it, so you can whip one up lickety-split.

Now, over to Erica!


********************


DIY Wood Round Ring Holder on Diane's Vintage Zest!



Hello Everyone!


I'm super excited to be guest posting today at Vintage Zest!  Diane is a fabulous blogger and I'm honored to be here.

A bit of background info about me - I'm Erica over at Dwell Beautiful and I specialize in DIY craft and home decor tutorials and decorating your house on a budget!  Today I'm bringing you a special tutorial on how to make your very own wood round ring holder.  I had several rings that were just sitting getting dusty in my jewelry box and decided they needed a good place to be displayed when I'm not wearing them. This is a super easy and quick tutorial that anyone can make!  Let's get started :)


Materials

DIY Wood Round Ring Holder on Diane's Vintage Zest!


  • Wood Round (I found mine at Michael's for a few dollars!)
  • Drill with 3/32 size drill bit
  • 3/4" gold cup hooks
  • China marker or pencil
  • Optional: hanging or stand making materials



Step 1

DIY Wood Round Ring Holder on Diane's Vintage Zest!



Take your china marker or pencil and lightly mark where you want your cup hooks to go. If you want to get really accurate, use a measuring tape or ruler to evenly space your marks. I just eyeballed it since I wanted a more imperfect and rustic look!



Step 2

DIY Wood Round Ring Holder on Diane's Vintage Zest!


Drill away! Position your drill over the top of the marks you made and start your drill, applying gentle pressure. Don't go too far otherwise you'll drill through the other side! A few seconds of drilling should be more than deep enough for your hooks.



 Step 3

DIY Wood Round Ring Holder on Diane's Vintage Zest!


Screw in those cup hooks! These screw in easily by hand. Tighten them and face them all in your desired direction! If you find they aren't screwing in easily, take your drill and drill the hole a bit deeper so the screw has enough room to catch.



 Step 4 (Optional)

DIY Wood Round Ring Holder on Diane's Vintage Zest!


Add some sort of device to the back of your round so you can hang it or stand it up. I knew that I wanted mine to stand on my dresser so I got creative and found an old wooden Ikea coaster I wasn't using and simply nailed it at an angle into the back! Some other fun options would be to add a picture hanging hook for a clean look or stapling a ribbon or bit of twine to the back for a fun hanging look. It's up to you!



And here is the finished product!

DIY Wood Round Ring Holder on Diane's Vintage Zest!


Isn't she a beauty?? I love the soft gold of the hooks and the warm rich tones and texture of the wood round. It's the perfect combo, in my opinion! Hang all your favorite rings from the hooks to sit pretty until you are ready to wear them :)


DIY Wood Round Ring Holder on Diane's Vintage Zest!


I absolutely love the detailing on the wood! It fits the rustic look I was going for perfectly. Here are few photos of it in my little jewelry corner!


DIY Wood Round Ring Holder on Diane's Vintage Zest!


And there you have it, a super quick and easy wood round ring holder in just minutes!  It's a great craft to showcase your rings and keep them all in one, organized place until they're ready to grace your fingers

Thanks so much again to Diane at Vintage Zest - make sure you keep following her blog for all her other great posts!


DIY Wood Round Ring Holder on Diane's Vintage Zest!


********************


I am so impatient to make this until my test is done, but I'm almost there.  This will definitely be on my list of items to make ASAP!

Pop on over to Dwell Beautiful to say hello to Erica, and keep up with her on FacebookPinterestInstagramGoogle+, and Twitter!


Happy crafting!




8 comments:

  1. I love this. I've been wanting to make a jewlery holder for a while but can't think of a surface to use. This is a cool one!

    ReplyDelete
  2. I love this idea so much. I bet it would work well with drfit wood from the beach. Now I know what to keep my eyes open for!

    ReplyDelete
  3. Wonderful idea! I am constantly misplacing my rings, but your project will fix that!
    Thank you!
    artsybuildinglady.blogspot.ca
    Val @

    ReplyDelete
  4. Very cute! I think this is the most unique way of hanging up rings :-)

    ReplyDelete
  5. i want to buy this! since i'm so not crafty ;)

    ReplyDelete
  6. Ha! Time to put a crafty friend to work or bribe Erica to make one for you. :)

    ReplyDelete
  7. Very nice post, thanks for sharing such valuable information. In the today’s life it is very important for us to become crafty if we like to use waste or unused products. This is really very unique idea to make ring holder and it looks very attractive. As I am a jewelry lover and I have collection of gems stones rings so this will be a great idea for me. I generally like to wear gems stone ring because it looks more attractive and royal. You can check latest collection on http://etanzaniteshop.com/

    ReplyDelete

I love to hear your comments! And putting in your two cents is always free. :)

.